Front panel/hard drive cage assembly

To remove the component:

  1. Power down the workstation blade.
  2. Remove the workstation blade.
  3. Remove the access panel.
  4. Remove all hard drives.
  5. Remove all hard drive blanks.
  6. Remove the hard drive backplane.
  7. Remove the two T-15 screws from the front panel/hard drive cage assembly.
  8. Remove the front panel/hard drive cage assembly.

    HP ProLiant WS460c G6 97436 Front panel/hard drive cage assembly

To replace the component, reverse the removal procedure.

Front panel/hard drive cage assembly