HP ProLiant WS460c G6

Mezzanine card

Optional mezzanine cards enable network connectivity or provide Fibre Channel support. For mezzanine card locations, see the system board components.

Because mezzanine cards are supported on multiple workstation blade models, the mezzanine card may have captive screws that are not required to secure it to the workstation blade. When installing a mezzanine card in this workstation blade, only two captive screws are required.

To remove the component:

1. Power down the workstation blade.
2. Choose one of the following options:
   • Remove the workstation blade.
   • If you are using the WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade:
     1. Remove the WS460c Graphics Expansion Blade access panel.
     2. Remove the WS460c Graphics Expansion Blade.
3. Remove the access panel.
4. Remove the mezzanine card.

   

To replace the component:

1. Install the mezzanine card. Press down on the connector to seat the board.

   

2. Install the access panel.
3. Choose one of the following options:
   • Install the workstation blade.
   • If you are using the WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade, install the graphics expansion blade, the graphics access panel, and the blade assembly.

Mezzanine card