Release button

To remove the component:

  1. Power down the workstation blade.
  2. Remove the workstation blade.
  3. Remove the access panel.
  4. Remove all hard drives.
  5. Remove all hard drive blanks.
  6. Remove the hard drive backplane.
  7. Remove the front panel/hard drive cage assembly.
  8. Remove the system board.

    Removing DIMMs, heatsinks, processors, and mezzanine cards is not required for this procedure.

  9. Remove the release button.

    HP ProLiant WS460c G6 99164 Release button

To replace the component, reverse the removal procedure.

Release button