Removing the WS460c Graphics Expansion Blade

  1. Remove the access panel. For more information, see “Removing the WS460c Graphics Expansion Blade access panel“.
  2. Disconnect the four PCIe/SAS cables from the PCIe riser board, noting their location for reinstallation.

    HP ProLiant WS460c G6 115204 Removing the WS460c Graphics Expansion Blade

  3. Remove the two Torx-15 screws that secure the Graphics Expansion Blade to the workstation blade (1).
  4. Slide the Graphics Expansion Blade back and lift it up to remove it from the workstation blade (2).

    HP ProLiant WS460c G6 115711 Removing the WS460c Graphics Expansion Blade

When replacing the graphics expansion blade, reverse the removal procedures.

Removing the WS460c Graphics Expansion Blade