Remove the workstation blade
|
|
CAUTION: Do not use the workstation blade release lever to lift or carry the workstation blade. Always support the weight of the workstation blade by handling the chassis directly. Improper use can damage the release lever and the workstation blade. |
To remove the component:
- Identify the proper workstation blade.
- Power down the workstation blade.
- Remove the workstation blade.
- Place the workstation blade on a flat, level work surface.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the workstation blade before beginning any installation procedure. Improper grounding can cause ESD.